If you’re installing wiring for your home theater system or a home security system, Installer Drill Bits can come in handy. These strong bits are capable of drilling into plaster and wood as well as some kinds of stone masonry. A small hole in the bit allows you to easily thread a wire into the created hole.
MAGBIT 3/8-Inch by 18-Inch Carbide Tipped Bellhanger Drill Bit
Features of this product:
- Carbide tipped steel
- Cuts masonry, brick, concrete block
- Carbide tip cuts fast
- Fish eye hole provided near tip of flutes to aid in pulling wire
- Longer bits provide extra reach
Irwin 1/2-Inch by 18-Inch Installer Twist Drill Bit
Features of this product:
- 18″ long, 1/2″ diameter, .370″ shank
- Hole in flute (head) makes it easy to pull wires through hole in wall
- Boring action is faster, smoother, cleaner in most every material encountered in wiring installations
- Longer flute section for deeper boring
- Special flute finishing process assures quick chip removal, no clogging, no binding
Irwin 1/4×18 #2 Installer Bit
Features of this product:
- Irwin #39104 1/4×18 #2 Installer Bit
- IRWIN INDUSTRIAL TOOL CO
MAGBIT 1/2-Inch by 24-Inch High Carbon Steel Bellhanger Drill Bit
Features of this product:
- 82 degree point for faster starts
- 2 recesses provided to allow for extension set screws – bits 5/8-Inch and over
- Fish eye hole provided near tip of flutes to aid in pulling wire
MAGBIT 1/2-Inch by 54-Inch Fish Bit
Features of this product:
- Flexible shaft
- Fish eye holes at both ends
- Self feeding screw point
- Drills holes down the length of wall cavity
- Fish eye hole provided near tip of flutes to aid in pulling wire inside wall cavity from either direction after drilling, with no damage to the wall
MAGBIT 1/2-Inch by 18-Inch High Carbon Steel Bellhanger Drill Bit
Features of this product:
- 82 degree point for faster starts
- 2 recesses provided to allow for extension set screws – bits 5/8-Inch and over
- Fish eye hole provided near tip of flutes to aid in pulling wire
