Shop Fox Roller Stand
Features of this product:
- 150-Pound capacity
- 13-Inch wide ball bearing roller
- All-steel construction
- Non-marring’ pads
- Unit folds flat for storage
The Shop Fox Roller Stand is a handy roller stand that folds up flat for easy storage when your do it yourself project is done. All-steel construction allows the roller stand to resist rusting and corrosion and makes it incredible strong. The roller moves smoothly, thanks to its ball bearings.
General International Flexible Roller Stand
Features of this product:
- Nine 1- 1/2″ by 13- 3/4″ Nickel Plated Rollers.
- 50″ maximum length and 14- 3/4″ compacted length.
- Maximum load capacity of 200 LBS.
- An adjustable height from 23″ to 36″.
The General International Flexible Roller Stand is a fully adjustable roller stand that you can customize to suit your exact needs for any project. The length extends from 14.75 inches to 50 inches in length and from 23 inches to 36 inches in height. The heavy-duty stand can hold up to 200 pounds.
HTC HRT-10 Super duty Adjustable Roller Table Stand
Features of this product:
- Exclusive wedge-shaped inner leg tightens under load
- Adjusts from 26-1/2″ to 43″
- 4 adjustable rubber non skid leveling feet
- 5 Galvanized steel ball bearing rollers
- Handle loads up to 500 pounds
With the HTC HRT-10 Super duty Adjustable Roller Table Stand, you can get your roller stand set up on even the most uneven of surfaces. The four independent leveling feet ensure optimal stability and are topped off with non-marking pads to protect flooring surfaces. The table stand can support up to 500 pounds.
HTC HSV-18 Pipe V-Head Roller Stand
Features of this product:
- 500lb capactiy
- Two dual bearing, galvanized steel rollers at 6″ x 1.625″ , with heavy-duty hex axle
- 26.5″ to 43.5″ height adjustment
- Non-skid leveling feet
- Exclusive wedge-lock inner support design
The HTC HSV-18 Pipe V-Head Roller Stand is incredibly sturdy and strong enough to bear up to 500 pounds of weight. An inner support with a wedge lock enhances the stability of the stand, and the non-skid feet self level, so you don’t have to worry about rocking on uneven surfaces.
MIBRO GROUP Single Roller Stand
Features of this product:
- Single roller stand
- 11-1/2″ wide with edge guide
- Height can be adjusted from 27-1/2″ To 43-1/2″
The MIBRO GROUP Single Roller Stand is a convenient single roller stand that adjusts from a minimum height of 27.5 inches to a maximum height of 43.5 inches. The stand is equipped with an 11.5-inch roller that has an edge guide for optimal performance, and its T-style legs are very stable.
HTC HVR-18 Super Duty Adjustable 26-1/2-Inch (to 44-Inch Tall) V-Shaped Point Roller Stand
Features of this product:
- 500lb capactiy
- Two adjustable steel roller balls at 1.25″
- 28″ to 44″ height adjustment
- Non-skid leveling feet
- Exclusive wedge-lock inner support design
The HTC HVR-18 Super Duty Adjustable 26-1/2-Inch (to 44-Inch Tall) V-Shaped Point Roller Stand is a V-shaped roller stand engineered for maximum stability with self-leveling feet and a wedge-lock inner support mechanism. The roller stand’s dual roller balls are adjustable, and the stand can hold up to 500 pounds of weight.
