Boring Drill Bits

Boring Drill Bits are a broad category of drill bits that are generally used for boring into wood. Often times, these bits for cutting holes are sold in sets, allowing you to purchase Boring Drill Bits in an array of sizes at one time for versatility when you’re completing DIY projects.

Milwaukee 8-Piece Universal Quik-Lok Flat Boring Set

Milwaukee 8-Piece Universal Quik-Lok Flat Boring Set

Features of this product:

  • UNIVERSAL QUIK-LOK – Quick and easy accessory changes. Gives the end user extra bit length in hard to reach areas.
  • DOUBLE WING SPURS – Reduces vibration while preventing “break out”. Spurs allow easy hole formation.
  • PATENTED CUTTING EDGE – Easier and faster wood boring over conventional models. Cutting edge removes chips fast, dissipating heat from the bit.
  • 1/4″ QUICK-CHANGE HEX SHANK – For use in all Universal Quik-Lok Extensions.
  • Standard Equipment: 6″ Universal Quik-Lok All Hex Extension; 6″ Flat Boring Bits: 3/8″, 1/2″, 5/8″, 3/4″, 7/8″,1″, 1-1/8″; and Case.


Amico 15/16-inch 24mm Woodworking Forstner Bit Wood Boring Tool

Amico 15/16″ 24mm Woodworking Forstner Bit Wood Boring Tool

Features of this product:

  • Product Name : Forstner Bit;Forstner Bit Diameter : 24mm-15/16″
  • Shank Length : ~2 1/2″;Total Length : ~3″
  • Material : Metal;Color : Silver Tone & Red
  • Weight : 57.8g
  • Package Content : 1 x Forstner Bit


Irwin Industrial Tools Speebor Blue Groove Pro Spade Bit Set with Case, 8-Piece

Irwin Industrial Tools Speebor Blue Groove Pro Spade Bit Set with Case, 8-Piece

Features of this product:

  • Blue-Groove point and cutting edge for faster chip removal – 4x faster than standard spade bits
  • Double cutting spurs scribe the outside of the hole reducing breakout
  • 10-Percent larger shank for added durability
  • Grooved hex shank prevents slipping in drill chuck or bit extension
  • Fits all standard quick change chucks


35mm Cutting Diameter Hinge Boring Drill Bit

35mm Cutting Diameter Hinge Boring Drill Bit

Features of this product:

  • Material: Metal
  • Boring Diameter: 35mm /  1.38”
  • Shank Diameter: 8mm / 0.315″
  • Shank Length: 66mm / 2.6″
  • Total Length: 79mm / 3.1”


1/2-inch Shank 9 Piece Carbide Tip Boring Bar Set

1/2″ Shank 9 Piece Carbide Tip Boring Bar Set

Features of this product:

  • 9 PC 1/2″ shank boring bars
  • Carbide tipped
  • Fat part of the shanks on all of them is 1-5/8″ in length.
  • There are different lengths on the tip to shank measurement as follows:
  • Small diameter 3/4″, 1-1/8″, 1-1/2″. Middle diameter 1-1/8″, 1-5/8″, 2-1/4″. Large diameter 1-1/2″, 2-1/4″, 3″.


Irwin Speedbor 13 Piece 1/4-Inch to 1-Inch Spade Drill Bit Assortment with Rack

Irwin Speedbor 13 Piece 1/4-Inch to 1-Inch Spade Drill Bit Assortment with Rack

Features of this product:

  • Includes 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, and 1″ and rack
  • Patented micro-groove point and cutting edge with extended spurs
  • For all 1/4″ and larger electric drills
  • Bores two times faster, lasts three times longer
  • 13 Popular Sizes