Hitachi 2-1/2-Inch Coil Siding Nailer
Features of this product:
- Tool free depth of drive adjustment; air deflector pivots 360 degrees; no-mar nose cap
- Anodized aluminum and comfortable rubber grip
- Includes safety glasses and 2 hex bar wrenches
- 10-1/2-by-5-1/6-by-11-13/16-inches; 5-pounds; 1-year warranty
- Long lasting rubber grip for added comfort
Maintain a firm grip when you’re tackling difficult, lengthy tasks with the help of the Hitachi 2-1/2-Inch Coil Siding Nailer. This nailer is made out of anodized aluminum, so it’s remarkably light in weight despite its power, and it features a rubberized grip that is comfortable to hold and slip resistant.
Stanley Electric Staple/Brad Nail Gun
Features of this product:
- Heavy-duty electric staple / brad nailgun with outstanding driving power
- Unique dual power lever (Hi/Lo) designed for use with hard or soft materials
- Quick-jam-clear mechanism saves time and hassles
- Includes 8-foot power cord
- Uses Stanley SharpShooter TRA700 Series or Arrow T-50 heavy duty staples and 1/2-, 9/16- and 5/8-inch brads
The Stanley Electric Staple/Brad Nail Gun is a flexible nail gun that can be used for fastening hard and soft materials. Just flip the lever to adjust the speed to suit your project, and you’re ready to go. The nail gun has a quick jam clear mechanism that allows for smooth operation.
Roberts 120-Volt, 15-Amp, Professional Electric Stapler with Carrying Case
Features of this product:
- 120 Volt (with North American plug), 15-Amp and 1,500-Watt drive solenoid
- Hard, heat-treated hammer mechanism
- Holds up to eighty-five 9/16-Inch 20-Gauge staples with 3/16-Inch crowns-Duo Fast model #5418-D (sold separately)
- 14-Gauge, 12-Feet power cord
- Ergonomic non-slip handle with rubber grip for maximum comfort and control
The Roberts 120-Volt, 15-Amp, Professional Electric Stapler with Carrying Case is ready to travel and built to stand up to wear and tear. The hammer mechanism has been heat treated to make it extra sturdy in order to ensure longevity. A rubber grip along the sides of the handle makes certain that your hand doesn’t slip.
PORTER-CABLE Roofing Nailer
Features of this product:
- Compact body design is 5-percent lighter for improved balance and control compared to previous model
- Tool-free adjustable shingle guide for accurate shingle placement
- Quick-set depth of drive helps prevent shingle damage
- Skid-resistant pads/wear guards for safety and tool protection
The PORTER-CABLE Roofing Nailer is a nail gun designed with the need of roofers in mind. Built into the design is an adjustable shingle guide that is quick and simple to adjust to ensure optimal placement for every shingle. This model is 5 percent lighter than previous nailers from PORTER-CABLE for enhanced maneuverability.
Hitachi Round Head 2-inch to 3-1/4-inch Framing Nailer
Features of this product:
- Round-head 2-inch to 3-1/4-inch framing nailer allows for single or contact actuation
- Tool-free depth adjustment, open-nose design; ANSI compliant
- Stainless steel magazine, comfortable rubber grip
- Includes protective bumpers, safety glasses; no carrying case
- 22 by 13 by 4-inches; 7.9-pounds; 1-year warranty
The Hitachi Round Head 2-inch to 3-1/4-inch Framing Nailer eliminates the need to reach for a tool when it comes time to alter the depth to suit your job. Flexible and easy to use, the nailer is fully ANSI compliant. With the nailer, you’ll receive protective bumpers and a pair of safety glasses.
PasLode 16ga 1-1/2″ Wide Crown Stapler
Features of this product:
- Air Roofing Stapler, Crown
- Leg Length 5/8 to 1-1/2 In., Gauge 16
- Magazine Capacity 150
- CFM per Shot 0.040
- Pressure Range 80 to 120 psi
- Tool Weight 4.9 lb.
A perfect tool for any roofer’s belt, the PasLode 16ga 1-1/2″ Wide Crown Stapler has a two-finger trigger and an adjustable depth of drive for ease of operation. The quick clear nose greatly reduces the risk of jams, so you can work for longer without interruption and get the job done as quickly as possible.
