With their corkscrew-like shape, Auger Drill Bits are easy to indentify. The bits have screw tips that bore into wood easily and twist the entire way along their length to make the hole clean and to remove as much of the chips and dust that are produced during drilling as possible.
Pit Bull 9-Inch Auger Drill Bit Set, 6-Piece
Features of this product:
- Creates deep, clean holes quickly and cleanly in hard or soft wood
- Lead screw pulls the bit into the work eliminating extra pressure and strain
- Use these bits with a hand or electric drill
- Comes complete with wood case
- Sizes: 3/8″, 15/32″, 9/16″, 5/8″, 11/16″, 25/32″
Greenlee D’VersiBIT Type A Auger Bit, 3/8 by 54-Inch
Features of this product:
- Wood-type auger bit with screw point
- Pulls itself through wood, avoids walking or skidding
- Excellent for drilling in soft woods or through thin sections
- Slow back-taper allows for easy retrieval
- Bends to meet your needs
Steelex 1/4-Inch to 1-Inch Deluxe Auger Bit Set, 7-Piece
Features of this product:
- The longer length of these quality Auger Bits allow the user to bore deep holes through most wood
- Great for walls and flooring
- The screw tip guides the bit on a straight path, while a hex shank provides for a positive grip
- Set includes 1/4″, 3/8″, 1/2″, 5/8″, 3/4″, 7/8″ and 1″ Auger Bits
Milwaukee 4 Piece Auger Set
Features of this product:
- Double Wing Spurs for clean hole cutting.
- Non-Stick Coated Flutes for faster chip ejection.
- Impact Rated Shank.
- Canvas Roll up pouch for easy storage and job site organization.
WoodOwl Tri-Cut 3/4-Inch by 7-1/2-Inch Nail Chipper Auger Bit
Features of this product:
- Reduced fatigue on the user and the machine because Tri-Cuts are up to 20% lighter weight than standard single spur augers.
- Safer than standard augers because the Tri-Cutting edges actually reduce nails to chips and filings. Other augers can grab the nail, pushing and pulling the user along with it.
- Smooth, consistent holes with minimal blowout for a clean hole with every cut.
- 7/16″ shank with quick-change power groove for easy bit changeover.
- Perfectly concentric design, which is guaranteed through the tightly-controled heat-treat and hardening processes, means that the hole cut will be exactly true to the diameter of the bit.
Irwin Industrial Tools I-100 11/16-Inch Auger Bit
Features of this product:
- Solid center design provides extra rigidity while boring
- Wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter, producing a faster, cleaner cut
- Single-spur cutting edge scribes the circumference of the hole for a smoother finish
- Coarse screw point provides fast boring in hard and soft woods
- All bits have a 4-1/2-Inch twist length and a 7-1/2-Inch overall length
