Corded Drill Presses

Shop Fox 3/4 HP 13-Inch Bench-Top Drill Press

Features of this product:

  • Motor: 3/4 HP, 110-Volt, 1,725 RPM, Spindle Speeds 250-3050 RPM
  • Drill chuck: 5/8-Inch
  • Spindle travel: 3-1/4-Inch
  • Swing: 13-1/4-Inch
  • Includes a 3-piece spindle sander drum kit with a mandrel and 80 grit sanding paper to fit the 1-Inch, 1-1/2-Inch and 2-Inch drums.

The Shop Fox 3/4 HP 13-Inch Bench-Top Drill Press is a highly versatile drill press that you can use for a wide variety of tasks. A 90-degree tilting table allows you to set the drill at the ideal angle, and the drill press can double as a sander due to its oscillating functionality.


Hougen 115-Volt Swivel Base Magnetic Drill

Features of this product:

  • Precisely line up your pilot with the holes center location
  • One stroke lock and unlock handle
  • Great for horizontal, overhead, tight areas, and getting out over another piece of steel
  • Rear mounted controls
  • Positive slug ejection

The Hougen 115-Volt Swivel Base Magnetic Drill is designed to greatly simplify drilling at your bench top. The guide holes allow you to quickly achieve proper alignment, and you can lock and unlock the drill with just a single pull. The controls are all on the rear of the drill for maximum convenience.


Kreg Foreman 3/4 HP Semi-Automatic Pneumatic Pocket Hole Machine

Features of this product:

  • Powerful semi-automatic pneumatic pocket hole machine
  • Lever operated; 1-second cycle time
  • 3/4-horsepower pneumatic motor; automatic air clamping
  • 90-120 PSI recommended; minimum compressor capacity of 5.3 cfm at 90 PSI
  • Manufacturer’s limited 30-day warranty

The Kreg Foreman 3/4 HP Semi-Automatic Pneumatic Pocket Hole Machine makes creating holes as simple as can be! A special air clamping cylinder allows this pneumatic pocket hole machine to self-adjust to the thickness of your material, so set up is as simple as properly aligning and then pulling on the lever.


Jet 12-Inch Drill Press with Digital Readout

Features of this product:

  • Compact bench top design allows for easy transport to different shop locations
  • Industrial duty 5/8-inch chuck handles large drill bits
  • Digital readout displays spindle speed for optimal drilling
  • LED work light increases visibility of work piece
  • Clear linear scale with depth stop for accurate, consistent drilling depth

When precision matters most, the Jet 12-Inch Drill Press with Digital Readout is the perfect drill press to choose for the job. Digital readout functionality allows you to closely monitor the speed of the spindle, and the model has an integrated LED light that fully illuminates what you’re working on.


Powermatic 3/4 Horsepower Bench Mortiser

Features of this product:

  • 3/4-horsepower bench mortiser with 1/2-inch chuck, in-line depth stop, and 5/8- and 3/4-inch bushing sizes
  • Operates up to 1,725 rpm, 5-1/2-inch head stroke capacity, reversible handle for left/right-hand operation
  • Some assembly required
  • Includes mortiser, 3/4-inch chisel bushing, chuck extension adaptor, chuck key, and handle
  • 16-5/16-by-13/3-4-inch base; 93-pounds; 1-year warranty

The Powermatic 3/4 Horsepower Bench Mortiser is an ideal mortiser for shops in which more than one operator must share a tool. That’s because this press can be reversed for right and left-handed operators. An in-line depth stop allows for quick and easy setup when you’re working at standard depths.


Milwaukee 9 Amp Compact Electromagnetic Drill Press

Features of this product:

  • Powerful 9.0 amp 1.1 max HP motor
  • Only 26.5 lbs. with comfortable carrying handle
  • Strong two-coil magnet
  • Two positions for feed handle – relocate without tools
  • Simple two-button control panel – unobstructed by feed handle

Need a drill press that you can easily move from location to location? The Milwaukee 9 Amp Compact Electromagnetic Drill Press weighs only 26.5 pounds and was made especially with portability in mind. The model even includes an ergonomic carrying handle that makes lifting and toting it easy. With only two buttons included in its design, it greatly simplifies drilling.